LIGHT STEEL KEEL ROLL FORMING MACHINE
Light steel keel is a new type of building material. It is a metal frame for construction made of high-quality continuous hot-dip galvanized sheet strips and rolled by a cold roll forming machine. It is used for modeling decoration of non-load-bearing walls and building roofs with paper-faced gypsum boards, decorative gypsum boards and other light boards as finishes. It is suitable for the modeling and decoration of various building roofs, the internal and external walls of buildings and the basic material for scaffolding ceilings. Light steel keels are widely used in hotels, terminal buildings, bus stations, stations, playgrounds, shopping malls, factories, office buildings, renovation of old buildings, interior decoration settings, ceilings and other places.
Light steel keels include ceiling keels and drywall keels according to their uses, and V-shaped, C-shaped, T-shaped, L-shaped, U-shaped keels according to their cross-sectional forms.
GEIT GROUP COLD ROLL FORMING MACHINE FEATURES
1. The machine is stable,no noise,no shake.
2. Computer controlled continuous production, PLC display, operation is easy, running is steady and reliable,endurable.
3. Cutting machine is characterized by stable driving, easy operation.
4. Hydraulic system use the hydraulic pump, long operating life,no noise.
5.
GEIT GROUP light steel keel forming machine produces very good flat ness products, with good bending pressure performance, can realize automatic fixed length cutting, automatic punching, high degree of automation. And the machine installation is quick and convenient. It greatly facilitates the operation and use of customers.
GEIT GROUP CEILING T GRID ROLL FORMING MACHINE DISPLAY
T bar suspended ceiling T grid rolling forming machine
Ceiling T gird system includes main beams, wall molding, and cross tees. It indicates a stab connection on the cross tees. This feature provides a secure connection and fast, accurate alignment confirmed with an audible click. This is the most commonly used and available grid system.
Main features of T bar:
1. High grade galvanized steel as main material, non-deforming, fadeless,moisture proof and anti-corrosive.
2. Strong close fitting, high symmetry
3. High load capacity
4. Easy and fast installation, save installing time and labor cost
5. Large production line and strict product inspection, larger quantity and better quality are available.
By this way, the ceiling T Grid Rolling Forming Machine now is quite popular.
T bar suspended ceiling T grid rolling forming machine for main T and cross T bar is designed to making the ceiling T bar in batch fully automatically.
1. Easy for installation, we will provide the operate manual of installation.
2. Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3. Full automatic production line and semi-automatic production line for customer choose.
4. The speed of the machine can reach 25 to 30 meter per minute.
5. Running in a high automation and intellectualism,no pollution
6. The molds are adjustable, so it can make adjustable length with adjustable punching type.
7. Punching per length, accurate mold processing, so we can make sure the punching 100% accurate.
PACKING LIST OF GEIT GROUP 25M/MIN MAIN TEE ROLL FORMING MACHINE
Part 1 |
1.5T manual decoiler |
Set |
2 |
Horizontal type |
Part 2 |
Main roll forming machine |
Set |
1 |
Gear transmission |
Part 3 |
Servo tracking punching & shearing device |
Set |
1 |
|
Part 4 |
PLC control system |
Set |
1 |
Delta |
Part 5 |
Hydraulic system |
Set |
1 |
HUADE |
Part 6 |
Collecting product table |
Set |
1 |
3m |
Part 7 |
Tools & spare parts |
Set |
1 |
Also include operation manual |
TECHNOLOGY SPECIFICATION OF GEIT GROUP 25M/MIN MAIN TEE ROLL FORMING MACHINE
1. Raw material |
Galvanized steel |
0.3-0.35mm |
Pre-painted steel |
0.24-0.35mm |
2. Decoiler |
Manual decoiler |
1.5T horizontal type |
3. Main roll forming machine |
Roller station |
18 rows ( As technical requirements ) |
Diameter of shaft |
50mm solid shaft |
Material of rollers |
45# steel, hard chrome plated on the surface |
Machine body frame |
Metal steel welded |
Drive |
Gear transmission |
Dimension ( L × W × H ) |
15000 × 1000 × 1200 mm ( According to the goods ) |
Weight |
About 7 tons |
4. Cutting Device |
Automatic |
Cr12 material, no scratches, no deformation |
5. Power |
Motor power |
5.5kW |
Hydraulic system power |
Energy tank with the power of 11kW |
6. Voltage |
380V/50Hz/3Phases |
As customer requirements |
7. Control system |
Electric control cabinet |
Rocker arm typr or cabinet type |
Language |
Chinese/English/Spanish/French or customized |
PLC |
Delta/Siemens/Mitsubishi, optional |
Control system |
Automatic ciontrol production of the whole machine. Can set batch, length, quantity, etc. |
8. Forming speed |
70m/min(customized) |
Speed is adjustable according to customer's request |
PACKING LIST OF GEIT GROUP 25M/MIN CROSS TEE ROLL FORMING MACHINE
Part 1 |
1.5T manual decoiler |
Set |
2 |
Horizontal type |
Part 2 |
Main roll forming machine |
Set |
1 |
Gear transmission |
Part 3 |
Servo tracking punching & shearing device |
Set |
1 |
|
Part 4 |
PLC control system |
Set |
1 |
Delta |
Part 5 |
Hydraulic system |
Set |
1 |
HUADE |
Part 6 |
Collecting product table |
Set |
1 |
3m |
Part 7 |
Tools & spare parts |
Set |
1 |
Also include operation manual |
TECHNOLOGY SPECIFICATION OF GEIT GROUP 25M/MIN CROSS TEE ROLL FORMING MACHINE
1. Raw material |
GI,GL |
0.47-0.8mm |
2. Decoiler |
Manual decoiler |
1.5T horizontal decoiler |
3. Main roll forming machine |
Roller station |
16 rows ( As technical requirements ) |
Diameter of shaft |
50mm solid shaft |
Material of rollers |
45# steel, hard chrome plated on the surface |
Machine body frame |
Metal steel welded |
Drive |
Gear transmission |
Dimension ( L × W × H ) |
15000 × 1000 × 1200 mm ( According to the goods ) |
Weight |
About 7 tons |
4. Cutting Device |
Automatic |
Cr12 material, no scratches, no deformation |
5. Power |
Motor power |
5.5kW |
Hydraulic system power |
Energy tank with the power of 11kW |
6. Voltage |
380V/50Hz/3Phases |
As customer requirements |
7. Control system |
Electric control cabinet |
Rocker arm typr or cabinet type |
Language |
Chinese/English/Spanish/French or customized |
PLC |
Delta/Siemens/Mitsubishi, optional |
Control system |
Automatic ciontrol production of the whole machine. Can set batch, length, quantity, etc. |
8. Forming speed |
70m/min(customized) |
Speed is adjustable according to customer's request |